SAME SAME - BUT DIFFERENT

KWS EB 8

Investment Mixing Machine

KWS Investment Mixing Machine EB 8

KWS Investment Mixing Machine EB 8
High Quality Castings at lowest Expediture in Production. High quality casting results require perfect casting forms. With KWS investment mixing machines and KWS equipment you will create the best basic for an effective casting production in first class quality. As the worldwide first manufacturer of investment mixingmachines we have the experience of more than 25 years. Close contact to the users of our machines, constant developmentand actual manufacturing technologies guarantee perfect castings and a maximum reliability.

BENEFITS:
  • High surface quality and contour sharpness on castings
  • Pleasant and clean work through simple operation
  • Minimum maintenance and wear and tear
  • Also available for platinum investment compound
  • For 5 flasks
  • Up to 10 kg investment powder
  • For a smaller but also high output capacity
  • Reliable serviceability
PROCESSING:
  1. 5 flasks are placed in the mixer and the stirring unit is swivelled over them.
  2. An adequate measured quantity of water is poured into the stirring container.
  3. The weighed investment material is filled into the stirring container. The mixer is sealed with a plexiglass lid which allows surveillance of all procedures. Now the investment material is mixed with the water under vacuum. Through the opening of the filling taps the underneath placed flasks are filled while still under vacuum. This procedure and simultaneous vibration allows flasks of highest quality to be produced.
  4. To clean the machine the mixer is swivelled over the drain bowl and then cleaned with a spray nozzle.
TECHNICAL DETAILS:
  • Filtering system for the protection of the vacuum pump improves the life cycle of the pump substantially
  • The taps are made of a special alloy which is not affected by gypsum and water.
  • Gaskets which are affected by the corrosiveness of the gypsum and are used daily have a life cycle of 2 - 3 years. Through loosening two screws they can be removed for maintenance or replacement (no dismantling).
  • Maintenance-free three-phase motor
  • Perfect protection against corrosion since all parts are made of aluminium (Al) or stainless steel.
KWS Investment Mixing Machine EB 8 High Quality Castings at lowest Expediture in Production - 1
Step-1
KWS Investment Mixing Machine EB 8 High Quality Castings at lowest Expediture in Production - 2
Step-2
KWS Investment Mixing Machine EB 8 High Quality Castings at lowest Expediture in Production - 3
Step-3
KWS Investment Mixing Machine EB 8 High Quality Castings at lowest Expediture in Production - 4
Step-4
KWS Investment Mixing Machine EB 8 High Quality Castings at lowest Expediture in Production - 6


© Copyright Protech Transfer - All Rights Reserved | Design by: dp